My first aquariums - 404 display/150 frag

[b09u5]

So I think I have this cased then. I have three sections, each on a seperate non-GFI breaker: Display Tank; Frag Tank; Sump. I will only be powering lights and powerheads on the tank breakers, and the sump will take the rest. Smaller things like the fans, and lower outlets are technically GFI as there is one between the breaker ant the first outlet.

I can simply continue as I planned with 3 GFI outlets on each of the tank breakers. I think that this means that if the lights trip the GFI, the 2 other GFI outlets on the same line would still work. If this is true, I am OK. If this is false, I need to teach my electrician a thing or two! If the lights keep tripping, I think I can simply swap that outlet for a non-GFI and keep the other 2 as GFI. Let me know if this is the case.

Here is what the setup would look like for both tanks:

non-gfi breaker-----GFI outlet lights-----GFI outlet lights-----GFI outlet powerheads


if that doesn't work:

non-gfi breaker----- non GFI outlet lights-----non GFI outlet lights-----GFI outlet powerheads

The setup for the sump would look like this:

non-gfi breaker-----GFI outlet heaters------GFI outlet return pump------GFI outlet skimmer-------GFI outlet doser----GFI outlet light-----GFI outlet open-----GFI outlet open.

Again, I was going with so many separate GFIs so if i had issues with any, all other things would work. If this is not the case, clearly the GFI outlets are redundant. I think this makes sense, and should work, but I could be wrong. I may need to feed each GFI individually from the main power ie: in parallel rather than in series.

Let me know your thoughts, Magma.