New Jarduino build gets started

[byee]

Originally Posted by daplatapus

If anyone is interested, I'll probably be making a custom order for the 4-LDD pcb boards with the pull down resistor jumper that rrasco made on the RC thread. PM me if you interested in any of the boards...

You will need to modify the Jardiuno code to latch on logic low instead of high.

These changes will work. Low = on and high = off.

Intermittently, this logic used to turn the relay on & off will work backwards because of the opto-iso.

Jamie does have a SSR (solid state relay) setup which is installed & wired directly behind the outlet. This setup is the most stable and the quietest - SSR don't make the mechanical latching sounds.

I hope this helps!