![]() |
#7
|
|||||
|
|||||
![]() Quote:
I did have a problem, though, on the first set, as they stopped once, and were getting a bit noisy. When I took them apart, I noticed quite bit of play on the shaft inside the impeller assembly. I emailed Coralife with my findings, and they mailed out another set of pumps. So, they are definitely good on their warranty. Not sure if this happened due to a defect, or my own doing. I had the problem shortly after having them apart for cleaning, and didn't notice then that they were worn. It's possible when I reassembled the impeller, I did not properly seat the shaft in the rubber bushings on the front, which would allow the shaft some play at that end. I also ran mine pretty hard, using the turbulence mode set at 10 seconds, so a lot of ramping up and down. Made for lots of action in the tank, but perhaps might be hard on the pumps. Now, I am just going to leave them alone, and only clean the outside as required. Also changed the turbulence mode to ramp up and down at longer intervals. They sure do flow a lot of water though, and yes, very quiet, when working properly.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. |
Tags |
power head wave |
|
|