Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 11-19-2012, 05:28 PM
whatcaneyedo's Avatar
whatcaneyedo whatcaneyedo is offline
Member
 
Join Date: Apr 2007
Location: Prince George, BC
Posts: 2,198
whatcaneyedo is on a distinguished road
Send a message via MSN to whatcaneyedo
Default

The CO2 dumping problem that I had was back in 2006 before I began controlling the pH within the reactor. How my tank sitter managed to bump and turn the dial on the regulator baffles me as well. For the longest time I blamed the manufacturer of the regulator but I was wrong. With my current setup the lowest it has dropped is 6.2 The controller closes the solenoid at 6.5 and warns me at 6.4 but if a lot of gas is going through it will still go as low as 6.2

Three years ago I had the alkalinity in the tank go to 5 DKH and the pulsing xenia that I had had for several years died. That only took 3-4 days to occur so I'd prefer not to push it and test your theory or mine. At the opposite end of the spectrum I've also had coral die at an alkalinity of 20 DKH.

Does it honestly sound simpler to you to have your tank sitter manually dosing every day while you're gone? All mine had to do was turn up the C02 slightly... once. Then it would have been problem solved. Maybe I'm the odd one here but that sounds pretty quick and easy to me. The real problem arose when I didn't quantify how much 'slightly' is (1/8 of a turn of the needle valve would have been good) and when he began ripping my system apart.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft

Old 120gal Tank Journal
New 225gal Tank Journal
May 2010 TOTM
The 10th Annual Prince George Reef Tank Tour

Last edited by whatcaneyedo; 11-19-2012 at 05:35 PM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 05:38 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.