Crussett's 120g build

[crussett]

Tonight I mocked up most of the plumbing. Nothing is glued, just slipped together. I found out I'm short 1 - 3/4" 45 degree elbow

Here is a full length shot of what I accomplished. You can see the external beananimal overflow with the full siphon on the far right, the open drain in the middle and the emergency on the left. All drains are 1". The full siphon and the open drain are plumbed into the drain section of the sump while the emergency is just plumbed into the return section. I also need to add the last few pieces so the drains almost reach the bottom of the sump. The two return lines join together and are plumbed into the return section where it will connect to my mag12. I still need to add another 45 degree elbow and a "T" to split the return off into the fuge.


This is just a closer shot of top section of plumbing.