|
|
|
#2
10-19-2010, 02:04 PM
|
|||||
|
|||||
Restrict the air flow to get the bubble size you want. Then adjust the foam height to where you want by restricting the output. Once you get it perfect do not touch anything as its a PITA to find that sweet spot again... if for some reason your skimmer starts acting up it probably means you just fed the tank some oily food, something died, something spawned, or it just needs to be cleaned. Heres a little trick: run a decent amount of fresh water through your air intake weekly (I use a full 1 gallon bucket) to dissolve any dried on salt that forms inside. Here's what my Bullet 3 looks like. BTW what skimmer do you have?
  
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour 
|
Threaded Mode
