Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > Vendor Forums > Reef Wholesale > Ecotech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-12-2010, 09:54 PM
tparsons tparsons is offline
Member
 
Join Date: Mar 2010
Location: Toronto, Ontario, Canada
Posts: 289
tparsons is on a distinguished road
Default EcoTech Battery Backup Cable Recall - Canadian Clients

Important Notice:

EcoTech Marine has issued a voluntary recall of the Battery Backup cable used for the VorTech pump.

Dear Customers:
EcoTech Marine has issued a voluntary recall on the Battery Backup cable for the EcoTech Marine Battery Backup. This recall also affects the cables supplied with the IceCap Battery Backup for the VorTech propeller pump, however IceCap, Inc. will be handling the recall of the cables for their accessory independently of us and we recommend that you contact them directly regarding a recall of their cables. It is important to note that this issue only affects those Battery Backup cables that are used with VorTech propeller pumps powered by the Wireless Wave Driver (WWD) driver but this recall will cover all Battery Backup cables regardless of which driver is connected with the cable.


VorTech pumps operating with the WWD may experience an electrical fault condition. In these cases, a battery backup could supply more current than the connection cable can handle which could cause the cable to heat up to an unsafe level. Therefore, there is a voluntary recall on the connection cable for the EcoTech Marine Battery Backup (image 1.1 shown below) for the VorTech propeller pump. Note the same issue will occur with the IceCap Battery Backup cable for the VorTech propeller pumps sold in United States and Canada. This will apply to Battery Backups used with all the following models of EcoTech Marine VorTech pumps:


- All MP40w Pumps equipped with the WWD
- Any MP40 and MP20 pumps that have been upgraded to the WWD

Note: this issue does not affect the use of the Battery Backup connection cable when used with MP10, MP10 ES, MP10w ES, MP20, MP40w ES, or any model VorTech pump that does not use a WWD driver. However, anyone that has purchased an EcoTech Marine Battery Backup will be eligible to participate in this recall regardless of what model VorTech propeller pump they are using.


To correct this problem swiftly and safely, we have revised the cables used with our Battery Backup accessory to include a cable that has an inline fuse built in. Any purchaser of an EcoTech Marine Battery Backup is eligible for this recall at no cost. Our revised cable will also solve this risk for use with IceCap batteries; however they will be handling the distribution of these components to their customers separately from us.


If you have purchased an IceCap Battery Backup (as indicated by the presence of their logo on the accessory, Image 1.3 shown below) or IceCap Battery Backup connection cable, please contact them directly for support at service@icecapinc.com or 1-800-7-ICECAP. If you have purchased an EcoTech Marine Battery Backup (as indicated by the lack of IceCap’s logo on the accessory, Image 1.4 shown below), please refer to below:

To receive replacement cables in Canada, please contact me directly at tparsons@reefwholesale.com. We will send you replacement cables free of charge upon submission of the recall form which we will send upon contact.


Discontinue use of the previous connection cables. Note that we are not requesting that you return your non-fused cables to us. Please destroy the non-fused cables by cutting them in half and dispose of them so that they cannot be used.


In order to improve the efficiency of this action, we will also be selling cables to any customer that wishes to place an order immediately and forego the recall paper work only for a period of approximately three months from the date of the recall.


From this date forward, all EcoTech Marine Battery Backups will contain the new fuse styled cables, which are distinguishable by the presence of a fuse holder built into the cable and a label showing part number 10427. However, there may still exist inventory that will contain the previous non-fused cable. If you purchase an EcoTech Marine Battery Backup from a vendor and it does not feature the new style cable with fuse, please contact us for your replacement cables.


We apologize for any inconvenience this may cause.


Image 1.1: Battery Backup Cable being recalled

Image 1.2: Correct Battery Backup Cable. Part Number 10427. Note the presence of a fuse.

Image 1.3: IceCap Battery Backup.

Image 1.4: EcoTech Marine Battery Backup.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:25 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.