Acrylic Work

[RCFA]

Interesting...Maybe I'll try that first.

Originally Posted by sphelps

Depending on how the baffle was welded in place it may be possible to break the seam. Apply a strong bending moment to the joint and while the force is still applied heat the the seam with a torch or heat gun. Try and add the heat slowly so it doesn't burn the plastic. I've done this before and it has worked but does depend on how the sump was built. When I built sumps I applied pressure to the outside seals after welding but not the inside seals (baffles) so this method would work for inside seams but not likely as well for outside seams.