Dez' Tank Journal

[Dez]

Well, more progress today. I painted the stand last night. Looking at it today though it'll need another coat. I cut a hole in my wall today. In the picture you'll see a rectangular hole in the floor already. I cut that hole in the floor 4 years ago when the house was being built in anticipation of setting this tank up. If we ever move, I'll just put a cold air return vent to cover this hole and there will be no patching of drywall needed. This hole is where my drains/return will be going to the basement sump directly underneath.



In that picture you'll also see a GFCI plug. I put that plug in tonight. There was never a plug there before. Originally when we were building this house, we were planning for the tank to stick out into the other room(living room) instead of the den. We were going to use the den as an office, but after we had kids, we realized that with an office on the main floor, you can't get any work done unless you ignore your kids. So now we had to add a plug. Wish some fishing of wires, I managed to get a new plug on there (on a separate breaker) without damaging the drywall.

Here is a picture of the plug and hole with the stand in place. Notice the green light on the plug .....it works!!!! I didn't even electrocute myself.