Bulkhead Plumbing question

[trix25]

Originally Posted by Mr OM

based on the link that is a 3/4 threaded bulkhead, but a 3/4 nipple cut it in half, thread inside the bulkhead and adapt to a 3/4 union. should be pretty easy.

If you are trying to thread over the bulhead you likely will not find the correct thread.

sorry mr. OM is not threaded on the inside only on the outside it has the threads. but i guess i can still do the same thing. use a 3/4" pvc pipe slip it in put the union on...so i guess there isn't anything that will thread over the bulkhead to a 3/4" reducer?
thanks for the help btw