Profilux II plus aquarium controller

[Matthias Gross]

Originally Posted by Gordon H

I just have it plugged into my digital power bar and only one out of the three fans is currently running. Any idea why the other two might have stopped?

All fans are hard-wired, that means: if one is running the other should do so, too.
There are these possibilities for the malfunction:
- the contact of plug and socket (PCB inside the extrusion) is lost - maybe through transport
- PCB is defective
- motors are defective
reason for defective motor and/or PCB: saltwater!
Please read the manual carefully, contact with salty water must be avoided in any case!