Help! I need some suggestions to fix my dKH levels

[michika]

Today's levels are:
Temp 81.2
pH 8.2
SG 1.023, I'm still raising this slowly, and its on the verge of 1.024
Ca 400ppm
dKH 6
Nitrate 0
Nitrite 0
Ammonia 0
Mg 1110ppm

The only thing that has changed is that I added Seachem's Carbonate to raise my dKH, and that was before I posed the original post. Calcium is up 60ppm, dkH is up 2 points, and Mg is up 150ppm. My tank is confusing me!

So my tentative plan is to do nothing for the next few days, as it seems like most of the levels are starting to fall into place. I'm also moving tomorrow, so it wouldn't be practical do to anything.

So my plan after moving is:
- get my SG back to 1.025
- adjust my top off water so that it has the appropriate dKH, I worry though because my kalk. reactor is in my topoff pail and draws directly from there.
- if needed then I'll raise my Mg levels, and finally my Ca levels.

Does this sound like a good plan?

If I raise the dKH in my topoff water can I still keep drawing that water for use in my kalk. reactor?