Tips and Tricks 101

[SuperFudge]

Hi all i thought this would be nice to bring up again, many here have not had a chance to read or add to it.

Ill Add another.

Microbubble`s from your drain line?

A good way to rid yourself of atleast 50-70% of them is to extend your drain line about 6-8 " below the surface of the water in your sump.
Then (or before hand) drill a hole about 4" above the water line (tap or tee here if you wish aswell,it works a little better to hold the line in place)
Insert some 1/2"(or so) diam rubber line (or rigid if you tee`d) in the hole (not too far in) and point this back down into the sump aswell (above the waterline), as the air will want to burp and spray a bit.

Air wants to exit this line instead, as its a little easier to get out rather than force the air 6-8" below the water line.

This has worked like a charm for me, if your unsure if its for you, make sure you just buy a union first, and cut the line and just dry fit some test pieces and run it to see how it works for you.

Marc.