Mag Drive pump

[reefburnaby]

Steve,

Say, these are pondmaster right ? Well...these are designed for ponds...not salt water aquaria. I believe the only difference between the two is the four screws that attach the impeller housing to the motor. These screws are stainless (or steel or a silverish screws) on the pond version -- so they will corrode over time. If you have the type with black screws....ignore my comment since you have the one designed for salt water. To fix, put some silicon on the screw heads or replace them with something else.

Hope that helps.

- Victor.

[ 31 December 2001: Message edited by: reefburnaby ]