Canopy, tank and overflows

[SuperFudge]

Lee,

They Came in 3, 6, 8, 10 and 12' length`s.

I chose the 12' because even when you slide it 4' back (wich was about the width of mine) it still is in the way, but just the other end is.

It is important that you also consider your tanks width when determining the length of the track, because the track must span the full tank width aswell as your "in the moved position" sitting space, and finally add your working room to that total.

So, Im guessing a tank 2' wide would need a minimum of a 6 foot track, that you have a full 2' of working room from the tank edge to the sitting spot on the canopy, wich still seems tight but doable.

*EDIT* i guess this applies only to tanks that have only one back or face acsess, rather than back and front acsess would allow you to push it to the opposite side your working on at the time.

Just a thought that may save you some returning to HD for exchanges like i had to do.


Marc.