Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 02-18-2002, 10:54 PM
terryp01 terryp01 is offline
Member
 
Join Date: Aug 2001
Location: Dallas, Texas
Posts: 78
terryp01 is on a distinguished road
Send a message via ICQ to terryp01
Default 125 gal drilled overflows

I agree with Shane (Reefmaster) on the pump. Little Giants make too much noise.

I would recommend any of the following:

Iwaki MD-55. Gives good flow rates and can also be used to run a skimmer at the same time. If you really want some water movement get a 70 and run all of your equipment with this. (http://www.iwakiwalchem.com/)

CSL T4 - nice quite pump and gives about 1200 gph at a 3' head. I run a T4 on my 180 and cycle a T3 to create the wave motion.

MAK are good pumps as well.

I am sure there are many others on the market but these are what I recommend and use on my own tanks.

One thing I would suggest if you are drilling your tank is to visit this guys site and click on the Standpipe link. (http://www.rl180reef.com/frames.htm). I have a somewhat modified version of this and it makes all the difference in the world on lessening the water sound.

Good luck (and drill the tank).
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 05:03 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.