My dream tank

[Majestic_Aquariums]

Yes. The finish is a black laquer. In Jim's stand, he was wanting a flat finish (little gloss) Laquer is measured for it's sheen by degree. 30'-35' being satin, 50' is semi, and 70' to 90' is gloss. We used 35' on this stand. I use a white "vinyl" laquer for the base sealer-takes lots of coats, with sanding in between all coats (light, 220grit sandpaper)

After 4-5 coats sealer, then it's time for black. First coat has a slight texture added.
As a rule, I like to mix the final coat black with an additional 50% clear, adds a bit more gloss. (this can be done, as black laquer starts with a clear base in the mixing process)
But with Jim's I just stuck with black, to give it the flat look, very little gloss.
Some of the pics show a good sheen, but it is actually a flat finish, it's just the flash.
Laquer isn't an oil base, but more an alcohol base I guess. Laquer dries fast, and cures much quicker than an oil based paint. That stuff can take a month to cure, laquer cures in 24 hrs.

Anyway, dry sand lightly once dry to the touch-anywhere between 20-40 min. is usually good.

If you plan on spraying yourself, do so in a WELL ventilated area, and wear a proper mask. The fumes are very toxic, and flamable. Best to do outside if you can.
Hope this helps a bit, let me know if you need more info.