LF - 50ml Dosing Pump

[byee]

Originally Posted by tang daddy

Very easy, just need to add a siphon break... I use a maxijet and added a T connection.one tube going to your sump the other pointing up at the ceiling and Make sure the tubing going up is higher than the ato tank/reservoir . Alternatively if you use a aqualifter you don't need a siphon break as those will stop when power is cut out but to be safe run the hose higher than the ato res/ tank!

I was using a maxi jet a couple years back but switched over to the aqualifter. I'm also using a solenoid valve with my aqualifter since water continues to be siphoned slowly when powered off. I want to loose the water valve solenoid power adapter......just too many wires.

This is why I'm looking at using a 50ml dosing pump

Originally Posted by corallivore

I bought a dosing kit a while back that I have not hooked up yet.



I think 2 pumps. a bunch of additives and a reef keeper lite.





Interested in the whole shebang?

Thanks but no thanks. I already have an Apex with an Apex doser.