Wp25 wavemaker pumps on an Apex controller

[banditpowdercoat]

I cant post my profile as I don't know how to copy it, but its pretty much the same as his, he copied that prof off someone else online just like I did I am sure. Found it on Manhattian reefs or Reef central I cant remember. Basically I have a few profiles. 2 pumps Red and Blue. (color of tape markings I put on their cables) The main profiles are synchronized, Wave red and Wave Blue opperate together, but in a opposite fashion. Profile set to x10 so its like .3 sec on .3 sec off. Red on, Blue off, then Blue on Red Off. Then the 3 timers operate the Calm, WAVE and Flush profiles. Calm is both pumps like 30%, Wave is Both pumps together, fast pulse, to make a bit different wave, then Flush is 1 on 100% for 10 sec, while the other is on 20%, then after 20 sec they swap, other side is 100% and 20%

Takes a bit to understand the Apex logic, but when you do, it all comes clear. I am a programmer by trade (PLC) So I can see these things, but can't explain them work a darn