FS BioPellet with TLF 150 - Calgary

[Jackie]

Originally Posted by globaldesigns

Good advice guys, I never thought to soak them. Personally I don't have issues with them sticking together... But if yours are, most likely you don't have enough flow.

The trip is to give enough flow so the top tumbles agressively while the mid to bottom area of the pellets don't. If you watch the reactor, you should see the bottom slower ones, slower move there way to the top to be agressive, while the top, then moves to the bottom. Basically a slow cycle through, with the top more aggressive.

I hope that made sense.

Yes, it make sense and I have seem enough youtube...but mine just stick together. I am about to put a mag-float it there to loose it up. I would like to run them in series with Rowaphos since I dont have much room in the sump. It is getting more complicated.