Anyone ever had a wavebox crap out on them?

[Tom R]

Originally Posted by christyf5

Died yesterday. There is power to the 6061 wave controller (lights are on etc). And the silver driver box makes a little noise that coincides with the lights, so its getting power. But the pump itself doesn't do anything. I've taken apart the pump and cleaned it, there aren't any deposits or anything inhibiting it from working. I've also consulted the manual and no go.

Any other suggestions or do I need a new motor block?

Hi Christy

I had one of my Tunze's do the same thing.

In the manual there is a section on cleaning and it shows a small disk at the bottom of the impeller. This disk has a number of tiny holes in it and they must be cleared of debry. Once I cleaned the disk throughly the alarm quit and the pump started up again.

I hope this works for you.

Tom R