RO/DI--people who have it can you help me?

[Myka]

The membranes have different efficiency rates.

Filmtec 50 gpd = 98% rejection rate
Filmtec 75 gpd = 98%
Filmtec 100 gpd = 90%
BFS 150 gpd = 98%

If your tap water is 225 ppm, and you're getting 18 ppm out of the RO, then your efficiency is about 92%. If I were you, I would change out your flow restrictor for a 75 gpd, and get a 75 gph membrane that is 98% efficient. This way you should get about 4-5 ppm out of the RO, and your DI resin will last much, much longer. This is probably your cheapest solution.