My new tank plan & How should i plumb my tank?

[Tarolisol]

Well i am soon to be ordering my new tank approx. 66"L 30"T 24"D this will be an inwall tank, but in the room where the tank will sit there will be a wall directly on one side of the tank and a support pole aganst the other side. Heres my plan return pump amp master 3000 hooked onto a ocean motions 4-way. So my question is how should i plumb my tank, as in how should the water enter back into my tank with my ocean motions 4-way. If i drill holes where should they be or if over the top where should i direct the water.
Thanks all for any suggestions.

[RobinL]

I personally would hook up the Ampmaster on to a closed loop with the Ocean n Motion.
as for the placement it would be like this,

http://www.reefsolution.com/gallerie...cat=500&page=3

And have a another pump of lower volume on the Sump.

[RobinL]

Front view with the 2 drains in the back.

http://www.reefsolution.com/gallerie...cat=500&page=3

[Tarolisol]

any particular reason why i shouldnt use it as a return from the sump as well.

[RobinL]

I prefer using a smaller volume pump for the return I feel that the sump is a good to increase your water volume and a place to have water collect for your skimmer.Fuge,reactors.

A Ampmaster 3000 is rated 3000gph at 5' so thats a hell of a lot of water going through the overflow/s really dont need that high a volume.
Another thing is the amount of tiny bubbles that will be created will be incredibly high and you will definatly have it returning into the tank at that volume.

On my Tank(125) I have a Rena 1200 for the return at 5" it is supplying 900-1000 gph.

[Tarolisol]

Hum... i dont really want another pump running, My sump is only goin to be a collecting point for water. My skimmer is goin to be outside my sump and my fuge will be a tank set away from the sump with a mag 7 pumpinh water into that. So in general nothing will be in the sump but water.

[RobinL]

If you Decide to make your system with the Amp to be your return you definelty must make several Baffels and 2 overflows then.

If you didnt buy your mag 7 yet I would get a larger model T it off with valves and supply your tank and Fuge with one return pump,and place the Amp on a closed loop.

[Tarolisol]

Well now you have me thinking... i have a mag 18 i was goin to use for my skimmer. But if i use that to return water to the fuge and tank then i would need a pump for my skimmer and theres no way the mag 7 will do it on a beckett skimmer that is 5 feet tall.

[Chin_Lee]

Tarolisol
I wouldn't consider using a mag 18 for a 5' skimmer because its not pressure rated. I have a 4' dual beckett skimmer and I had a mag 18 AND a mak4 to the injectors which worked well combined. I have changed the configuration since and I got a Iwaki70 teed off to both injectors and thats working well as well. You should consider getting a pump thats pressure rated for that 5' beckett skimmer.

[Tarolisol]

yeah well im planing on a mak 4 for the skimmer but have to wait for christmas. For now the mag 18 will work fine.