![]() |
#1
|
|||||
|
|||||
![]() I'm thinking about upgrading my set up. Currently running a rsm 250 happy with it
But I want to go bigger thinking 125 gallon. I'm currious what you fine folks would build if you had a budget of around $3500. Sent from my SGH-I747M using Tapatalk 2 |
#2
|
|||||
|
|||||
![]() That's a bit less then my budget for my 120 I'm building, but some things in the works for my tank are
2 radions Skimz sk181 skimmer Custom sump profilux 2 Ai sol refugium/frag light 2. Tunze 6105s Right now my budget is $3800 and I'm about $300 over once you factor in salt, chems, and odds and ends. Just to name a few. Most of the stuff ie. Tank, skimmer profilux is used, but in good shape. Keep your eyes peeled around the buy and sell ads. And if your interested in LEDs they are quite cheap right now compared to this time last year..
__________________
I'm not 'fallow' you must be talking about my tank! Last edited by Nano; 12-03-2012 at 05:16 AM. |
#3
|
|||||
|
|||||
![]() What are things that you would like to correct, or just do better in your next setup? :-)
|
#4
|
|||||
|
|||||
![]() For that kind of money, you can find lots of great full setups where somebody is shutting down. You could even buy a setup and go to Mexico for a week
![]() 2000 seems to be a common price for 180 setups with various amounts of gear. Use the rest to tweak in some of the gear you want that didn't come with the setup.
__________________
Brad |
#5
|
|||||
|
|||||
![]() The all in one setup is great to learn on but I'm at the stage that I want to be able to tweek things. Such as adding a sump reactors led lighting better skimmer ect.
Sent from my SGH-I747M using Tapatalk 2 |
#6
|
|||||
|
|||||
![]() Quote:
If you're not into buying used, then I would start with calling around and seeing what the price of a 120g would be (based on your specs). Actually, you should maybe start figuring out what you want your 120g tank to look like first. Do you want starfire? Only partial starfire? Internal overflow box, external? Do you want a euro brace? One piece euro-brace? Trimless? All of these things will affect the price of your tank. It all starts with the tank. Therefore, depending on how much of a hit your budget will take with the tank will determine how much is left for the rest of the stuff. |
#7
|
|||||
|
|||||
![]() witch ever way you decide I always loved the in-wall setup as you could have lots of room for tweaking and upgrading without the hassle of running into lack of space.
That said I could offer advice comparing my system to others I have seen. things I like having spacious aquarium back room Big skimmer ![]() biggest sump I could fit in the space planned I like the DIY even though sometimes its cheaper to get pre finished product LED all the way (lots to chose from DIYs and I like radions,kessil and few out there)out of all I love my DIYs as I could tweak them as needed outside over flow coast to coast box with double herbie.(for later modifications if needed) water circulation I beleive the more the marrier ![]() If going the route of LPS and SPS I will go with a at least triple doser. |
#8
|
|||||
|
|||||
![]() I'm defiantly going new. Thinking 3 side starfire inthe range of 120-150 gallons. What are your thoughts on overflows.
Sent from my SGH-I747M using Tapatalk 2 |
#9
|
|||||
|
|||||
![]() Quote:
I myself have had tanks with both internal and external overflows and I prefer external. I'm also a big fan of Herbie drain styles. Quiet and works great. |
#10
|
|||||
|
|||||
![]() Cool. Any recommendations for a tank builder. I'm in port moody bc.
Sent from my SGH-I747M using Tapatalk 2 |