Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Filtration and Skimmer Specific

Reply
 
Thread Tools Display Modes
  #21  
Old 10-04-2012, 06:12 PM
Kes1221 Kes1221 is offline
Junior Member
 
Join Date: Sep 2012
Location: Edmonton
Posts: 10
Kes1221 is on a distinguished road
Default

that doesn't sound fun. Will the filtration be okay without the spongy filters? When we took apart the useless Fluval, they were so caked with sand and gross looking stuff.....
Reply With Quote
  #22  
Old 10-04-2012, 06:16 PM
subman's Avatar
subman subman is offline
Member
 
Join Date: Jan 2009
Location: Edmonton
Posts: 1,509
subman is on a distinguished road
Default

the LR is your filter the spongy thing and such are more for freshwater where there is no other source of filtration. It's one of the great joys of a SW tank, also one of the biggest mistakes made by ppl moving from fresh to salt.
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux.
http://www.canreef.com/vbulletin/sho...threadid=84782
Will trade subs for frags

My other summer hobby:
http://www.edkra.ca
Reply With Quote
  #23  
Old 10-04-2012, 06:32 PM
Kes1221 Kes1221 is offline
Junior Member
 
Join Date: Sep 2012
Location: Edmonton
Posts: 10
Kes1221 is on a distinguished road
Default

Yes we are definetly guilty of moving from fresh to salt and since we bought the set up system it seemed like it was okay with the canister.
We have heard different things about the amount of rock you actually need for a tank. Right now we have about 50pounds in a 40 gallon and then about 30 or so pounds in the 33 gallon.

The 40 gallon has a couple cleaner shrimp and sand sifting snails in it with the coral as well. The 33 gallon just has a couple snails, fish, and a sea urchin.

Will that be enough rock to keep the system filtered and happy?
Reply With Quote
  #24  
Old 10-04-2012, 07:12 PM
sphelps's Avatar
sphelps sphelps is offline
Member
 
Join Date: May 2006
Location: Lyalta, East of Calgary
Posts: 4,777
sphelps is on a distinguished road
Default

I agree with others, you don't need the canister filter so if it's broke I wouldn't bother with a new one.

Im my book there are seven types of filtration
  1. Basic Biological: This is Nitrifying Bacteria (NH4 -> NO2 -> NO3)
  2. Advanced Biological: This involves a more advanced method of denitrification (removes NO3) by adding a carbon source to the water and possibly a type of filter designed to create anaerobic conditions.
  3. Skimmer: Removes raw organics before converted to NO3
  4. Chemical: Stuff like carbon, GFO, ect (can aid in removing organic waste and phosphates)
  5. Mechanical: Stuff like foam, floss, filter socks, ect that remove particles from the water.
  6. Water changes: Removes NO3 and other contaminants while replenishing useful elements.
  7. Refugium: Growing and harvesting algae in a separate part of the aquarium (usually in a sump). Algae uses NO3 and phosphates to grow, thus by growing and harvesting you're naturally lowering these contaminants.

Everything except 1 & 6 is optional although some might argue with 6 but let's not get into that just yet. In saltwater live-rock is your 1 and it does it quite well even allowing possible denitrification which removes NO3 naturally. NO3 is nitrate which you want to limit to reduce algae growth and promote better coral and fish health. Skimmers aid in the reduction of NO3 by removing the organic waste prior to breaking down into NO3. Canister filters that contain bio-media are very good 1s, better than live-rock. However too good can be a bad thing as your skimmer will not function as well as it could because in a sense it doesn't have enough time to remove organics before they are already converted to NO3.

4 is typically only needed if you're really looking to polish the water and/or reduce phosphates for optical conditions for certain corals. They require some caution as they can shock the system if too much is used and there are risks involved regarding contamination that have happened in the past.

5 is a good idea however requires constant maintenance to prevent 5 from turning into a 1, and the good kind of 1 which is actually bad

A sump is simply a way of utilizing an overflow which allows for surface skimming (organics float) sending what needs to be filtered to the skimmer more efficiently. It cleans things up a little providing a place for equipment and allows for larger equipment like a giant skimmer to be used.

For me I try and keep things simple, 1, 3 & 6 results in what I believe to be the best ration of good results to low maintenance.

Last edited by sphelps; 10-04-2012 at 07:16 PM.
Reply With Quote
  #25  
Old 10-04-2012, 07:31 PM
Spyd's Avatar
Spyd Spyd is offline
Member
 
Join Date: Jul 2011
Location: Kitchener, ON
Posts: 188
Spyd is on a distinguished road
Default

I would spend my money on a HOB skimmer if you wanted to do anything. There is really no advantage to the canister. Too much cleaning and can become a nitrate factory if not well kept.
Reply With Quote
  #26  
Old 10-06-2012, 05:47 AM
Kes1221 Kes1221 is offline
Junior Member
 
Join Date: Sep 2012
Location: Edmonton
Posts: 10
Kes1221 is on a distinguished road
Default

Is there a certain size we should look at for sump tanks for our 2 tanks? What amount of rock will we need....
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:06 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.