![]() |
#1
|
||||
|
||||
![]() I am wondering what you use to clean your glass in a nano tank. I use a Magfloat cleaner for my nanocube and it doesn't seem to clean the glass at all. Also, the magnetic part seems to separate from the holder quite easily.
|
#2
|
|||||
|
|||||
![]() I had the same trouble, even with the largest mag float, I figured the larger would hold better, but no such luck. I use one of those hand held glass scrapers and one of the mag cleaners from Walmart, as the magnets is pretty strong even on 3/8" glass
__________________
I'm not 'fallow' you must be talking about my tank! |
#3
|
|||||
|
|||||
![]() I have three suggestions.
Kent Pro Scraper http://www.royalaquariums.ca/c/109/k...e-pro-scrapers Mag-Flip 100 http://www.royalaquariums.ca/p/412/m...uarium-cleaner Vertex Duplex Cleaner http://www.royalaquariums.ca/p/859/v...-algae-cleaner The Vertex Simplex and Triplex will be available in the near future |
#4
|
|||||
|
|||||
![]() Any suggestions for an acrylic tank?
![]() |
#5
|
|||||
|
|||||
![]() magfloat is best for giving a wipe for film, a proscraper was one of the best reef purchases I made
|
#6
|
|||||
|
|||||
![]() You can get an acrylic version of the Kent Pro Scraper
|
#7
|
||||
|
||||
![]() I will give the proscraper a try. I am sure anything will be better than the magfloat.
|