|
|
|
#11
08-09-2011, 05:39 PM
|
|||||
|
|||||
It's heavy duty plastic, at least 1/4" thick. I certainly hope I couldn't crack it by tightening it with my bare hands...! Plus both of them? :S
I can see the water slowly build up around the threads in the lid... It seems like the seal isn't tight enough... Quote:
__________________
Gary Tank was up for 7yrs and 10months. Thanks Everyone! 2016/2017 180Gallon Build Coming Soon... |
|
#12
08-09-2011, 09:33 PM
|
|||||
|
|||||
|
the threads do not seal, the O-ring does the sealing, i have purchased 4 of that type canister from BRS and have found that there are 2 different threads, they are very close but you can't get them to seal if they don't match.
also i have had to tighten them with the wrench sometimes, they are very strong so don,t be afraid to crank on them a bit
__________________
Crap happens, that's why they sell toilet paper in 48 roll packs! |
| Tags |
| caco3reef, media reactor review |
|
|
Linear Mode
