|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  harley wiring anyone know anything about it i have an 82 sportster and the left sighnals an tail light wont work. any ideas? 
				__________________ Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built.   | 
| 
			 
			#2  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   No idea on that model but when I had to extent my wiring when I put mini aps on my 08 all the wiring came to a central spot where they all connected. Follow the wiring check all your connections. 
				__________________ Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build | 
| 
			 
			#3  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   yeah just goin through it all now i also have chris comin over to look , i got a feeling its a cracked wire or a bad ground 
				__________________ Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built.   | 
| 
			 
			#4  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   More then likely a bad ground, you should be on the right track. If not ground or broken wire might be in the ignition switch. 
				__________________ Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build | 
| 
			 
			#5  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   everything else is working fine 
				__________________ Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built.   | 
| 
			 
			#6  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   Start with the basics, bulbs, connections, grounds, conuniutity from switches to the bulbs, power at the connectors, seeing the age i would check the resistance in the wiring also could have some corrosion issues. At least it should be an easy system no ecms or anything. 
				__________________ 360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank | 
| 
			 
			#7  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   we have determined the signals to be a switch issue so im ordering one tomorrow , and it got too dark to work on the tail light so thats tomorrows project 
				__________________ Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built.   | 
| 
			 
			#8  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   Signal switches are usually the culprit, it was my issue on my 2000 Magna that I also have. Fairly easy fix, tail light should be simple to find if you found the signal problem this fast. Nice job Dennis   
				__________________ Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build | 
| 
			 
			#9  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   i was the flashlight guy chris gets the credit for this one, wiring confuses the crap outa me 
				__________________ Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built.   |