My 67g Reef build

benzzz · #1 01-13-2011, 11:59 PM

Hi all.

After a long summer I have cleaned house and tore down a few tanks. All that I have left set up is my 65g and my 30g breeder. Which is plumbed together. Well this project will reflect of building a 2 sided viewing tank which i just picked up from another reef member and tear down the last 2 tanks and combine them into the new tank.

I will post equipment and other stuff I am going to have to get new or used from fellow reefers.

Keep checking in for updated and feel free to drop some comments or criticism

Dimensions are 72x18x12 = 67g Starphire Closed loop system.

benzzz · #2 01-14-2011, 12:03 AM

a few pictures of the start

benzzz · #3 01-14-2011, 12:04 AM

Pump I am going to use for the closed loop is a Blue Line T4 Velocity Series external pump. I have read they are super quiet but run a little hot.

benzzz · #4 01-14-2011, 12:05 AM

I dug out my Vertex IN180 and cleaned it up for this tank. My 65 & 30 which are plumbed together does not have a mechanical skimmer in the Sump . I have approx 300 lbs of live rock which is filtering this system but unless I run 2 sumps under this new tank to house that much LR I may have to get rid of some.

Hopefully I will have the top built soon.

I am looking at 3- HQI Sunlight Supply Reef Optix 150 watt pendants to go over top of this baby.

benzzz · #5 01-14-2011, 12:06 AM

Top of the stand is 46" off the floor but the tank is only 12" high so 58" to top of tank. I think it will be at a nice level when sitting on a bar stool leaning on an oak ledge to hold your favorite beverage

benzzz · #6 01-14-2011, 12:07 AM

So........ I got the closed loop all plumbed in. I am going to change the way it was setup from the dump and return on the same end. I am going to use both as a dump and have the return come in from the other end pushed by a Mag 9.5. On the end of the return I think I am going to hook on a Vertex Mocean 3500 WaveMaker. Any thought on this unit does anyone have one??? dinoflagellates

benzzz · #7 01-14-2011, 12:13 AM

Thought I would add a picture of the Vertex Mocean 3500 WaveMake. I am going to hook this up at the end of the return.

lorenz0 · #8 01-14-2011, 01:50 AM

love the diamentions of that tank

benzzz · #9 01-14-2011, 02:50 AM

Quote:

Originally Posted by lorenz0

love the diamentions of that tank

Thanks Lorenzo. I think it will be a sweet build once I get it going

Beanz · #10 01-14-2011, 03:36 AM

dude this tank is gonna b so boss. i fricken love shallow tanks i am already droolin over how sick its gonna look