![]() |
#11
|
|||||
|
|||||
![]() Quote:
the problem with comparing with surface area is that it tells you nothing about actual intensity at a given point in the tank. for instance I could put 400 watt ushio MH bulbs on normal ballasts on my tank and bump my total up to 165 watt/square foot but I would actualy have less light at any given point in my tank as the PAR output is lower on the 400 watt ushio than I obtain on my 250 watt HQI (this is not speculation but actual measured values.) so you can see why it is hard to go by any measurment that uses watts. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#12
|
|||||
|
|||||
![]() oh Sam, how is that purple digitata doing?
![]() Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#13
|
||||
|
||||
![]() Steve am I correct to assume that I have 48 W / sq. ft. based on my demensions given earlier and pc wattage?
__________________
Aspen....where the beer flows like wine!! |
#14
|
|||||
|
|||||
![]() some whare between that and 60 because of the bow.
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#15
|
|||||
|
|||||
![]() Quote:
![]() |
#16
|
|||||
|
|||||
![]() Ryan just to confuse you some more, you were looking at my tank while I was gone, I have a total of 570 watts over that main tank. With a 57 watts sq/ft. But as you know most of my corals are in the top 6" of the water, directly under the MH lights.
![]() Lee
__________________
Need more time for the tank... Break a leg! |
#17
|
|||||
|
|||||
![]() Anemones do better with actinic supplementation. IMO and according to Joyce Wilkerson.
![]() |
#18
|
|||||
|
|||||
![]() Quote:
Here are 2 pics with all 3 lights on. Pics taken under different camera shutter speeds to allow more exposure in 1 pic than the other. You can see the MH in the center. Directly behind it at the same height is the 50/50. Below that at the top of the tank is the VHO actinic. The clip-on fan is on the right. ![]() ![]() MORE . |