![]() |
#1
|
||||
|
||||
![]() 77 Gal w/ Black Stand.
Dimensions 47"x16"x24". Not Drilled. Some scratches. Has been without water for 10-12 months. $100 OBO. SOLD ![]() 2 x Coralife 48" T5 strips. No bulbs. 28w i believe. Used for 1yr before upgrading to T5HO. http://www.bigalsonline.com/BigAlsUS...lestriplight48 $30 each. ![]() I would most likely be selling my current 48" Tek T5 HO, 4x54w and buy a new upgraded fixture. Used for 1yr 3mo. Bulbs included. Bulbs are 2 1/2 months old. Mounting Bracket included. Fixture: http://www.jlaquatics.com/product/sl...C+4+x+54W.html Mounting Bracket: http://www.jlaquatics.com/product/sl...acket+Kit.html $420 ![]() Last edited by hummer; 08-21-2009 at 08:12 PM. |
#2
|
||||
|
||||
![]() Bump.
I am doing a leak test on the tank. |
#3
|
||||
|
||||
![]() ive been looking for some used t5s
what condition are they in? when would i be able to take a look |
#4
|
||||
|
||||
![]() Quote:
But they were used for 1 year. Has some salt on them but I have cleaned most of it off. |
#5
|
|||||
|
|||||
![]() Off topic, sorry, but by any chance is this a Hagen tank and does it have a center brace or no? Reason I'm asking is I think I have the exact same setup purchased used over 2 years ago. I often wondered about the lack of center brace and added a wooden one just in case. Thanks in advance for any info.
FWIW, I'm happy with mine and anyone considering purchasing, if it turns out to be a Hagen like mine, none of the glass panels are tempered so it is totally drillable if desired.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#6
|
||||
|
||||
![]() Quote:
|
#7
|
|||||
|
|||||
![]() Great, thanks for the info. The stand in your photo is a dead ringer for what I have as well and the fact that it has no brace is further confirmation. Also the unusual size of 77 gal. Standard 48 length & 24 height but width is 16 which is a bit different too. The top plastic trim has a "Hagen" logo stuck to it.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#8
|
||||
|
||||
![]() Hey Mike,
You are correct. It is a Hagen tank. The Logo was on the other side of the tank. And it appears that the middle does have a slot for a brace. I never noticed it ![]() |
#9
|
|||||
|
|||||
![]() Thanks very much for the update hummer. "slot for a brace"?? You mean the trim? Top trim on mine has no slot of any kind that I can see. As per my previous post, I didn't like the way it bowed out at the center when I filled it so I ghettoed up a wooden brace for it, but looks to me like Hagen designed it without one if you have two of them with no brace. I haven't bothered doing up a nicer brace since this tank will become either a sump or refugium when I upgrade to a larger one. Won't be near as full as it is now, so I'll lose the wood.
Sorry for the hijack, but you get a Sunday bump for the thread... Thanks again and good luck on the sale. The tank has done well by me.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |