|
|
|
#2
07-10-2008, 07:03 PM
|
|||||
|
|||||
I believe the 1" take 1-3/4
I looked at Princess Auto on the south side the other day. They didn't have any. That really sucks if they do now as I ordered some form China.
__________________
Robb Last edited by Parker; 07-10-2008 at 07:08 PM. 
|
|
#5
07-10-2008, 07:32 PM
|
|||||
|
|||||
|
I wouldn't waist your money, you're basically spending $30 on one hole saw as the only one you'll ever use is the 1 5/8" (42mm). I've drilled many, many holes the smallest one Ive ever used is 42mm and that was rare, 45mm is the standard for most 3/4" and some 1" bulkheads.
Rather buy exactly what you need from TKH Diamond Tools Best deal I've ever found, and I can vouch for them, they work well.
|
|
#6
07-10-2008, 07:54 PM
|
|||||
|
|||||
|
Ebay... I bought a 65mm hole saw for a 2" bulkhead and landed on my doorstep about $25 for everything. If you want I can look up the name of the seller .. it was from Hong Kong, but really, seriously, it was like $15 for the bit and $10 for the postage.
And if ebay not really your thing, I believe mops.ca (based in Ontario) sells diamond hole saws in the $20-30 range. You need a 1-3/4" hole for a 1" bulkhead. And that's assuming a sched40 bulkhead (black). Sched80 (grey I think?) is even thicker walled and will require a larger hole size for 1".
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#7
07-10-2008, 07:56 PM
|
|||||
|
|||||
|
Oops. Well, I don't need to look up the name of the ebay vendor I used .. it's the same one spshelps has linked to. So basically I can vouch for that vendor as well.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#9
07-10-2008, 08:47 PM
|
|||||
|
|||||
|
Quote:
I bought them Monday and haven't heard a thing from them yet though.
__________________
Robb
|
Linear Mode
