![]()  | 
	
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 Decided to post up the progress of my build. Wanted your thoughts on it.   
		
	
		
		
		
		
		
	
		
		
	
	
	![]() 1st off, here's the plan of the tanks and stand. ![]() ![]() Here's the tank and stand setup. The tank is a custom size. Gives me about 90 gallons. I like the added height and depth it has, which is why I went this route. I put about 2" of sand in there. ![]() The sand I put has a diameter of .5 - 1.5 mm, which is a nice size grain. I personally like it more than the thicker grains. ![]() Finally, here's the sump. Sump size is 22 wide, 20 deep, and 18 high. The middle area will be setup as a fuge. Has a 7" sandbed. The return pump is a mag 9.5, (950 gph). I added a T, with a return back to the sump, so I can regulate flow to the main tank without restricting the water output from the pump. Thats as far as I got so far, Any thoughts, suggestions, criticism? Thanks  | 
| 
		 
			 
			#2  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 Looking good so far.  Is the sand in the fuge the same as the bag you are showing?  Are you planning to seed the sand with some live-sand? 
		
	
		
		
		
		
			Lastly, how are you managing the flow accross the fuge? I looked at a center fuge but all the input I received suggested that my flow would be too great and so I put it on the side with a seperate pump (TOM125) providing some minor flow to it. 
				__________________ 
		
		
		
		
	
		
		
	
	
	Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013.  | 
| 
		 
			 
			#3  
			
			
			
			
			
		 
		
		
	 | 
|||||
		
		
  | 
|||||
| 
	
	
		
			
			 Are you beefing up that stand?  What's it made of?  I don't know if I'd put 1000lbs of stuff on that Ikea looking shelf without some beefing up  
		
	
		
		
		
		
			
				__________________ 
		
		
		
		
	
		
		
	
	
	32"x32"x20" Cube-ish tank  | 
| 
		 
			 
			#4  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 Quote: 
	
 Quote: 
	
 yeah, I was worried as well, but I won't have a problem. I built the stand purposely so it wouldn't have a center brace, so I have full access to the sump/fuge. The lateral pieces of wood are directly under the tank sides. They're 1 1/16" thick, and the top shelf is 2 1/4" thick. The weight from the top shelf is also distributed along the length of the stand, so the extra 2 lateral strips also will help balance the load.  | 
| 
		 
			 
			#5  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 I like the looks of it! Personally I dont think the stand looks like it is from ikea to me at all. Nice the stand is bigger than the tank for some extra space! 
		
	
		
		
		
		
			Keep us posted! 
				__________________ 
		
		
		
		
	
		
		
	
	
	60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor.  | 
| 
		 
			 
			#6  
			
			
			
			
			
		 
		
		
	 | 
|||||
		
		
  | 
|||||
| 
	
	
		
			
			 Your fuge should be 10% of your volume and 10% of your flow for it to be a true fuge. having a DSB you want good flow. so it depends on what you are trying to achieve. 
		
	
		
		
		
		
			It will be too much flow the way you have it now for a true fuge. DSB you need to seed I don't think a bit of rubble will be enough. If you use live rock and seed from your main you should be okay just remember you have a lot of sand at 7" it will take time. I would start with less and add sand slowly to let it become mature this takes time. You want a good diversity in your sand bed. DSB can become lethal if they are not done right. Just my 2 cents. Other than that its a nice setup I like the size and sump. 
				__________________ 
		
		
		
		
	
		
		
	
	
	150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.  | 
| 
		 
			 
			#7  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 I don't know what the definition of a "true fuge is", but I guess I'm using an alternative route. lol.     
		
	
		
		
		
		
		
	
		
		
	
	
	Provided I have enough flow thru the fuge to make the macro algae tumble in the water, I'll have accomplished what I'm trying to do. I can adjust the flow, so I'll have to find a balance with the dsb and the macro algae. I do agree with you on the DSB. I'll try to seed the tank with as many pieces of live rock, and with different live sands. Thank you...  |