![]() |
#1
|
||||
|
||||
![]() hey everyone,
some of you may remember my flooding disaster about one month ago. at that time i replumbed my tank so that the original pump to tank return line was an emergency overflow, and plumbed the new return up the back/outside. this was working fine, but even with my durso i could hear gurgling though the airline and i was getting lots of mist in my sump from airbubbles in the drain. I finally put a valve on the drain today and went herbie style. what a treat. completely silent and no more mist/air bubbles in the sump ![]()
__________________
If it is alive, I can most certainly kill it |
#2
|
|||||
|
|||||
![]() I have em too. Thus far I haven't found anything better. It's amazing how quiet they are.
__________________
300 Gal 6x3x28 high Starphire peninsula w/external herbie/bean animal hybrid +150 Gal custom sump with 30gal fuge section, (both built by Concept Aquariums Calgary), 3x Ecotech Radion xr30w g2's(soon to be G3 Pros), Jebao DCT 12000 return pump, 2x Jebao RW 20 powerheads, Tunze Ato, Vertex ro/di, Reef Octopus Ext 200 skimmer run internally. |
#3
|
|||||
|
|||||
![]() My new custom 135 sitting half full in the living room has a herbie on it. Can wait to get it fired up and (not) hear it!
__________________
My Tank: 135G display, 45G Sump, 20G top off. 2 x 400 W, Bullet 1.5, Snapper Return, Profilux. ------------------------------------------------------------------------------------------------------ My Photo Website |
#4
|
|||||
|
|||||
![]() Excuess my ignorence but What is a herbie.
Got a link or pic J |
#5
|
|||||
|
|||||
![]() Quote:
http://www.reefcentral.com/forums/sh...hreadid=344892
__________________
My Tank: 135G display, 45G Sump, 20G top off. 2 x 400 W, Bullet 1.5, Snapper Return, Profilux. ------------------------------------------------------------------------------------------------------ My Photo Website |
#6
|
|||||
|
|||||
![]() Best drain method ever! So easy to adjust and you really can't hear a thing.
|
#7
|
|||||
|
|||||
![]() Woulda went herbie, but think I am tempered bottom, and only have dual 3/4" drains, and a Mag1800 pump/ Just aint gona equate out without both drains workin
|