![]() |
#1
|
|||||
|
|||||
![]() Thinking of DIYing an O3 reactor the wife is sick of getting dizzy when the O3 is on JK
Any thoughts or experience with a O3 reactor Last edited by vanreefer; 02-10-2007 at 02:26 AM. |
#2
|
|||||
|
|||||
![]() Check out this thread on RC, there are links to DIY, and which methods work better.
http://reefcentral.com/forums/showth...=ozone+reactor This is the reactor I am using. http://www.aqualifesupport.com/getDetail.php?ID=337125 The best one is the MTC http://www.marinetechnical.com/page6.html My setup: Air is supplied by a Tetra Luft pump through a 500mg air drier, into a Red Sea 200mg/hr ozonizer and redox controller, then into the pressurized ozone reactor. Tank water is fed into the reactor from the main pump return and the output is scrubbed of residual ozone through a MTC SR-14 substrate reactor filled with carbon before returning to the sump. ![]()
__________________
Brian ____________________________________________ 220g inwall 48"x36"x30" 110g mangrove refug/sump Poison Dart Frog Vivarium |
#3
|
||||
|
||||
![]() I'm using an MTC reactor with the carbon filter for water & air as well as the Luft pump & Ozotech Poseidon ozonizer & dryer. Works great. I just need a bit more water pressure through the unit.
__________________
225g reef 3x250w MH 8x39w T5 Sfiligoi/ACLS, Deltec AP851, Deltec PF601S, Deltec KM500, Ozotech Poseidon, Aquatronica, Tunze TS48, Tunze Nanostream 6025s, Aqua UV 114w, MTC Ozone reactor, Cole Parmer peristaltic pump 67g reef, Euro-Reef RS135, 60g refugium, Mag 9 return, Tunze Nanostream 6025s, 4x39w T5 |