|
|
|
#1
09-16-2005, 02:22 AM
|
|||||
|
|||||
RO/DI humming
Ok i have heard my system humm like a a high pitch wine. So what would caouse that to wine like that i can here is all thur the house...
mike
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. 
|
|
#2
09-16-2005, 04:32 AM
|
|||||
|
|||||
|
post
Sounds more like your pipes are making the noise like what you hear sometimes when running the shower.
I do not remember what causes this or the fix but I will look and see if I can find out
__________________
http://www.globalreefers.com/
|
|
#3
09-16-2005, 12:31 PM
|
|||||
|
|||||
|
Re: RO/DI humming
Quote:
STeve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#4
09-16-2005, 02:00 PM
|
|||||
|
|||||
|
If you are running a selenoid and a float valve, ill bet the selenoid is the culprit.
It is the membrane in the selenoid that detects pressure from one side to the other. sometimes when the float valve is just barely letting water out the seleniod will hum, because the pressure is so close to being equal inside it. Does the squeal sort of get higher and higher pitched until it completley stops ? Theres a few ways to correct this, lemme know if you have one on there. Marc.
__________________
Confucious say : Things that come to those who wait, will be things left over by those who didnt.
|
|
#5
09-16-2005, 05:05 PM
|
|||||
|
|||||
|
Marc you are correct that is it i have a solenoid on there with a float switch along with it its teed off to a kalk reactor...
mike
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
Linear Mode
