![]() |
#21
|
||||
|
||||
![]() OK now I don’t know if I am that naïve, but do you not put support beams across the open span to support the bottom of the tank? :confused:
I always thought that was a given, if not well colour me blue. :D I just thought the tank glass is not strong enough to hold the pressure of the glass and the rock and you had to put down something like 2x6 or such to add the additional support. As you can tell I always buy commercial stands, unless until I get a bigger tank. Patrick |
#22
|
|||||
|
|||||
![]() Patrick, even when you buy a stand, the bottom glass doesn't touch anything. The frame raises it a 1/4" or so. The bottom is strong enough to hold the weight. If you look closely at your tank, you'll notice the glass isn't touching anything. Unless it's acrylic, which then requires full bottom support.
|
#23
|
|||||
|
|||||
![]() Brad looks great!!! :D
But I have to say when I was building my tank, I talked to the boys a SeaStar and they said that they support the bottoms of big reef systems. Like 200+G systems. They recomended for my 120G with 4 holes in the bottom to put 1-1.5" of ply wood down on top of the stand frame. Then to use some carpet to take up the gap between the tank edge and glass bottom. I ended up using 2x 5/8" sheets screwed together and then contact cemented the carpet to the wood. Lee [ 09 August 2002, 09:20: Message edited by: Lee ] |
#24
|
|||||
|
|||||
![]() Thanks Lee. I do have a sheet of 3/4 ply under the tank covered with 1/2" styrofoam. I don't believe it touches the foam though.
BTW, were you still interested in the 75g? |
#25
|
|||||
|
|||||
![]() Brad you got Mail!!
|
#26
|
|||||
|
|||||
![]() Hi Brad. what a great looking set up. I would like to see that in person sometime. Rachel
|
#27
|
|||||
|
|||||
![]() Rachel, all I need is about 5 minutes advance warning and you're welcome to stop by. I'm near the Monkey Tree pub if you get to that area much.
|
#28
|
|||||
|
|||||
![]() Quote:
|
#29
|
|||||
|
|||||
![]() Thanks Troy, thanks a lot!! BTW, you know you're sworn to secrecy about that sort of stuff, don't you? It's a guy rule.. ;)
|
#30
|
|||||
|
|||||
![]() OOops! Sorry Brad, btw, your set up looks great!
|