![]() |
#11
|
||||
|
||||
![]() According to what I have heard.. Water softeners should not be used to water for your tank.. Your not even supposed to drink it.. Normally the softener is hooked into the hot water line anyways.. You are also not supposed to use hotwater for Drinking/Cooking as hotwater will leech metals from your hotwater tank/copper pipes
Unless its a Sodium free Water softener that uses resins, this may be a different story as well.. I saw the latter in a recent Utility bill, there was a info booklet with that info in it. With the relative cost of RO or RO/DI its best to go that would. Jim
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors |
#12
|
|||||
|
|||||
![]() Quote:
![]() ![]()
__________________
Gary CAN'T WE ALL JUST GET A BONG!?! ´¯`·.¸¸.·´¯`·.¸ ><((((((º>´¯`·.¸¸.·´¯`·.¸ ><((((((º> `·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º> `·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º> ´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((((º> ´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((((º> |
#13
|
|||||
|
|||||
![]() Quote:
__________________
Brad |
#14
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Gary CAN'T WE ALL JUST GET A BONG!?! ´¯`·.¸¸.·´¯`·.¸ ><((((((º>´¯`·.¸¸.·´¯`·.¸ ><((((((º> `·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º> `·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º> ´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((((º> ´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((((º> |
#15
|
||||
|
||||
![]() Hi group...thanks for the replys.
Since the water will go in this weekend (Sunday), it looks like it will be good old Calgary tap water from an un-softened line. My water softener has a by-pass valve that make this an easy step. Wish me luck.... ![]() Thanks very much. Mike |
#16
|
|||||
|
|||||
![]() if you decide to use tap water, call Water Works ahead of time to see if they have put any additives in the water due to the cold snap.
they can provide a water analysis report for Calgary water. i once lost 18 parrot cichlids because of tap water. IMHO, an RO unit is the best investment Tak |
#17
|
|||||
|
|||||
![]() might want to also at least use "Prime" water conditioner.
|
#18
|
||||
|
||||
![]() IMO I'd hold off on filling it until you get your RO/DI unit a few days won't kill you and may save you some headaches down the road.
Dave |
#19
|
||||
|
||||
![]() Hey Mike,
How's the set-up comming along? I figure you've had water in it for almost a month now? Hope all is fine, looking forward to seeing it. A true example of a guy doing it all properly, in the beginning! Thanks.Rob
__________________
www.aquariumstands.net |
#20
|
|||||
|
|||||
![]() FYI, I have been using straight tap water for more than three years with no ill effects at all. I am more than happy with it.
![]()
__________________
Bob ----------------------------------------------------- To be loved you have to be nice to people every day - To be hated you don't have to do squat. ---------Homer Simpson-------- |