![]() |
#11
|
|||||
|
|||||
![]() hey Steve,
That is actually not a bad alk consumption at all if you have a good load on the system. My last 150 sps system consumed almost 1.5 meq/l or dkh ( i dont remember wich units..what does salifert test in ?) a day (with a heavy coral/fish load). I believe Jamies consumes about the same. I noticed this originally when my bottles of co2 needed changing and the reactor was off the system for a day or two. Then during future changes i could always guage consumption. More Alk Consumption in my opinion, just boils down to really good coral growth and/or more pollution. Another thing i noticed, but didnt understand...is that it seemed to level out after about 2-3 days, and remain almost stable but very low alk..like 2.0, its almost like at that level, the corals possibly didnt do much growing therefore not much consumption. Marc.
__________________
Confucious say : Things that come to those who wait, will be things left over by those who didnt. |
#12
|
|||||
|
|||||
![]() Hey Marc, I was thinking along the same line but no one else has mentioned that they noticed the same thing. Thanks for confirming my suspicions.
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#13
|
||||
|
||||
![]() Steve how is your alkalinity these days? Did you perform your 50% water change yet? Did you find the cause of your rapid depletion?
|
#14
|
|||||
|
|||||
![]() Quote:
ya the cause of the dropping is the corals, growth has exploded and they are sucking the ALK up like there is no tomorrow, good thing my kalk reactor is keeping up with the Ca demands. I have a few things to get built for other people then I have to either fix my old Ca reactor of build myself a new on to control my Alk levels. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#15
|
|||||
|
|||||
![]() Steve,
There is an article on pH is this month's Reefkeeping Magazine: http://reefkeeping.com/issues/2004-09/rhf/index.htm |
#16
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
![]() |
Thread Tools | |
Display Modes | |
|
|