VDM and tunze 6055 setup

[windcoast reefs]

Originally Posted by Aquattro

If you unplug the cable to the VDM they should be on 100%..right?

Yup, but when they are plugged in they just pulse every 30 seconds for 1 second. Can't manually turn them off, they just pulse. Then I unplug it and they go back to 100%, another project for after work I guess!

[Aquattro]

Also, if you have them plugged into the power bar, make sure the outlets are turned on.

[Aquattro]

Originally Posted by windcoast reefs

Yup, but when they are plugged in they just pulse every 30 seconds for 1 second. Can't manually turn them off, they just pulse. Then I unplug it and they go back to 100%, another project for after work I guess!

Mine do that in feed mode, not sure why, I haven't looked at it yet. But that tells me the outlet isn't firing properly. Likely just a syntax error..

[windcoast reefs]

Originally Posted by Aquattro

Also, if you have them plugged into the power bar, make sure the outlets are turned on.

Yup the outlets are on, tested them with a lamp. Just ordered another cable, needed it anyways for another set of pumps. Then I can narrow down the problem

[windcoast reefs]

Originally Posted by Aquattro

Mine do that in feed mode, not sure why, I haven't looked at it yet. But that tells me the outlet isn't firing properly. Likely just a syntax error..

Okay I'll post my code after work and see if that's the problem.