Jamie's 13.3G Custom

[JDigital]

Very cool tank! Nice work on the DIY too.

[yellowworld]

Originally Posted by JDigital

Very cool tank! Nice work on the DIY too.

Thanks very much, I think i like building and designing the tank and seeing it all come together and work more haha

[Ginu]

Awesome setup so far and that wave is crazy in that little tank.

The wave box is awesome (what kind of pump did you use for that) and do you find that it gets noisy with the water flowing into overflow as the wave hits it?

[FishyFishy!]

Originally Posted by Ginu

do you find that it gets noisy with the water flowing into overflow as the wave hits it?

Yeah thats what I was wondering too. Do you hear a water trickle every time the water overflows into the overflow section?

(Don't have sound on my comp at work, so not sure if the video you posted had sound lol)

[yellowworld]

Originally Posted by FishyFishy!

Yeah thats what I was wondering too. Do you hear a water trickle every time the water overflows into the overflow section?

(Don't have sound on my comp at work, so not sure if the video you posted had sound lol)

Not really actually, becuase the water level in the tank is above the top of the overflow when the wave comes it just sends a little extra out, there really isn't any noise at all, plus the height of the water in the overflow box is high enough to keep it from spashing or gurgling or anything, the only noise i can hear in that tank is the hum or the pumps


also i used a tunze nano wavebox that i pulled apart to make my wavebox, its just a 6206.200 turnbell pump

[yellowworld]

Update!

ok so today was pretty good all around however I had a hickup and its set me back some cash and some time but id rather have it happen now then later. It was my own fault I wasnt quite thinking and I went to put the pluming together with the bulkhead tightened up and on the last joint of the last drain this happened






But after a long moment of staring with a blank look of derision and disappointment at my stupidity, i pulled it off the tank and and started to do something I couldnt break haha

I covered the white tube inside my wavebox with some black ORCA marine glue, I used it because that stuff is like tar it sticks to everything in one coat, i put some on my finger and began to smear it around, then i covered the white impeller of the pump too! everything is black now!








Then after I had gotten over my newly found irrational fear of plumbing and armed with me new found knowledge of tightened bulkhead is finished up my return line

[nerdz]

Wow, great build!

That is the smallest bean animal overflow I've ever seen!

[yellowworld]

Originally Posted by nerdz

Wow, great build!

That is the smallest bean animal overflow I've ever seen!

hahaha yeah it took a little thinking to make sure it would all fit, i also had to try it out just to see if it was possible with only 1/2" pipe haha but it all works perfectly...now

[yellowworld]

Alright so I managed to save as much as i could and as a result the ball valves sit just slightly lower but its all good everything is back on track, and i got a thicker piece of glass this time and i think I'm becoming very proficient at drilling glass i knocked out those three holes in 10 minutes haha

[Ginu]

Sorry to hear about the mishap of the overflow box, although it looks like you're right back on track with the new one.

I also would like to suggest some sort of reinforcement for the three pipes coming down to the sump as those pipes will become something very similar to a crow bar once they are long enough and any tap or accidental light hit might either break the box again or blow out the back glass wall. I find that the easiest way to fix this by cutting a wooden block and attaching it to the back of the stand with the pipes resting and anchored to this block.

I really like that wave maker...