#41
|
|||||
|
|||||
Quote:
The trick is that low wattage devices must use the "Relay" ports on the EB8 (which are plugs 4 and 8) instead of using the Triac plugs. An Energy Bar 8 has 6 triac and 2 relay plugs standard. If you use low wattage devices on a triac plug, it may not turn them off correctly, and this is an issue with triac technology not the Apex. I'm really happy with my Apex so far and I only set it up on Tuesday. I'm about to setup a feed cycle to turn off my return pump and skimmer for 10 minutes while I feed. Additionally it controls my cooling fans based on water temperature. Happy with it considering how little it cost. P.S. I'm using it with two BRS dosers that I bought on Black Friday (and Randy's two-part). Last edited by cwatkins; 12-31-2010 at 06:45 PM. |
#42
|
|||||
|
|||||
And we can't forget that cool sig block you have now
My research has shown that most people are happy with it regardless of cost, meaning it's not a "it works good for being less expensive" pattern. I think the Apex full unit will do everything I need it to do as well as the Profilux and perhaps with a friendlier programming approach. The support for it seems good with the forum at RC, so really, I think it's a good investment. If the Profilux was the same price, or even 10% more, I might go that route, but mostly for the blue lights.
__________________
Brad |
#43
|
|||||
|
|||||
With the Apex you'll still get a blue backlight display.
|
#44
|
|||||
|
|||||
Oh, well that cinches it!!
__________________
Brad |
#45
|
|||||
|
|||||
LMFAO...you can choose or change the RKE display to what ever colour fancies you at the moment
__________________
Glass box with stoney stuff and fisches... |
#46
|
|||||
|
|||||
You work for those guys, don't you???
__________________
Brad |
#47
|
|||||
|
|||||
More than happy with my RK2. I dont however have any programming brains, so its not being used to its furthest ability. Perhaps not the same as some systems but great for the price it cost me. Been running perfect for over three yrs. now. Only upkeep has been replacement of temp probe and super excellent customer service and web site as someone mentioned.
If I had a new large tank one day again, {not going to happen}, I may go Profilux for a few reasons, including some of our sponsors.
__________________
Doug |
#48
|
|||||
|
|||||
No...But I'm thinking maybe I should
__________________
Glass box with stoney stuff and fisches... |
#49
|
|||||
|
|||||
Quote:
The Profilux is certainly a nice unit with tons of curb appeal, but that's not enough to warrant the price. All of the top 3 seem to have great support, so again, it comes to curb appealrice ratio. For me, the happy medium will be the Apex. Unless a Profilux seller wants to price one into my range, then I'd reconsider
__________________
Brad |
#50
|
|||||
|
|||||
__________________
Brad |
Thread Tools | |
Display Modes | |
|
|