ELOS KH test kit issue

[ickmagnet]

I am using this kit and it says to stop adding drops when the color changes from cyan to yellow however, it only changes from a cyan to orange with no real yellow in between. It just goes from a lighter orange to a darker orange so i have no idea when to stop. Anyone else have this issue? I shook the bottle as directed before use.

[BlueTang<3]

How old is the test kit? Thats weird

[globaldesigns]

ELOS KH, goes from Bluish to yellowish. At least for me that is what I see, as I use the same kit. Add one drop at a time, then swirl until it goes from the bluish to the new color... Take the number of drops and then divide by half.

To make your kit last longer, I actually fill the vile with half the required water it wants, then add drops until the color change. The number of drops is the value of KH... I have done this for quite awhile and sure stretches the kit out longer.

[ickmagnet]

Good money saving tips. I'll try that.

I actually just bought the thing so it is brand new.

I am now thoroughly confused and will be asking for more help with regards to my Calcium reactor that i just set up after a pump mod. It is not making any sense. Had I known that it was going to be this complicated, I would never have bought the damn thing.

[Dyspnea]

I had the same problem. You have too really read the directions closely

For part two of the test you need a clean vital with new tank water.

[BlueTang<3]

Originally Posted by Dyspnea

I had the same problem. You have too really read the directions closely

For part two of the test you need a clean vital with new tank water.

You must be thinking magnesium. The KH you just add 5mls of water and each drop is .5dkh

[Dyspnea]

Oh yea, your right. Got them mixed up, It was 4 am when i posted thou

[Myka]

If it turns orange there are too many drops. You should take the reading when there clearly is no blue left. I find it goes from cyan, to light cyan, to lighter cyan, and then there will be one drop where suddenly it definitely isn't cyan anymore. That's when I take the reading. In my case, I find that is a light urine color.

[globaldesigns]

Originally Posted by Myka

If it turns orange there are too many drops. You should take the reading when there clearly is no blue left. I find it goes from cyan, to light cyan, to lighter cyan, and then there will be one drop where suddenly it definitely isn't cyan anymore. That's when I take the reading. In my case, I find that is a light urine color.

Thats it... When it looks like PEE!!!

[spawn]

On My test kit step 4 reads like a misprint. It reads:

Step 4) Each drop of reagent corresponds to one degree of hardness. The total number of the drops used equals the total hardness of the solution in dkh for example 8 drops =4 dkh.
To me that says 8 drops = 8dkh Anybody else have this print in their kit?