moonlighting

[spawn]

Just wondering, if many people run moonlighting 24-7 in their systems to enhance coral color & fluorescence throughout their tank while the main lighting is running? Also what are some of the other ways people have used to brighten up their tanks?

[kien]

I do not run my moons 24/7. The day lights are so bright that they totally overpower my LED moon lights and I have lots of them! Moonlights in general are not meant to be that powerful. If they were I'm pretty sure your fish would have a hard time sleeping

[spawn]

I guess I misspoke when I said "brighten up their tanks". Not to say make it super brightly lit, as opposed to pulling more of the colors out of everything in yer tank. So it is more visually awesome. aka the effects of black lighting.

[kien]

Again, the day lights are so bright that any pop that LED moon lights bring out are virtually washed out by the day lights. In my experience anyway. I don't typically see people with tonnes of LED moon lights either. Like maybe two or three spot lights? I suppose if you flood your tank with them it might make a difference?

At any rate, you are better off using your day lights to help bring out some colours. Use supplemental lighting like a T5 actinic bulb or two, or even a 22K rated bulb. The other problem with moon lights is that they tend to have a spot light effect so you're only lighting/enhancing a very small area. That is unless you flood your tank with led moonlights

[Chowder]

As Kien stated above Moon Lights are generaly not used as supplement lighting . They are used to add a moonlight effect. If you are looking to supplement your day lights T5's and LED strips are what you want to use for pop or to enhance colours. I use to Ecoxotic Panarama 10"-12" strips or modules. Two covers my whole 5 foot tank.

http://www.ecoxotic.com/catalog/prod...g0fqkb7rfbvko6

Chris

[spawn]

I'm running a red sea max 250 with 6 t5 39w bulbs already, 3 x 10000k R.S. orig. bulbs & 3 actinic 1 R.S. orig & 2 giessmen actinic. Not to say that it's not good, just think it could be better. This is my first tank & was started on may 9/2010. would post some pics. but have tried and the upload keeps failing.

[kien]

Originally Posted by spawn

I'm running a red sea max 250 with 6 t5 39w bulbs already, 3 x 10000k R.S. orig. bulbs & 3 actinic 1 R.S. orig & 2 giessmen actinic. Not to say that it's not good, just think it could be better. This is my first tank & was started on may 9/2010. would post some pics. but have tried and the upload keeps failing.

You can do a lot with 6 t5 bulbs. I would personally find 3 10K bulbs a little too far on the yellow side for my tastes (even with 3 actinics). Perhaps play around with different combinations. The beauty of T5s is that the possible combinations are mind boggling. Actinics generally do not have a lot of par so what you can do to achieve a similar affect is use 22K bulbs instead. They will provide that colour POP that you're looking for while still providing usable par for coral growth. Also consider throwing in one or two 14K bulbs. They are a nice middle ground between the benefits of a 20K/22K bulb and a 10K bulb. Decent PAR with decent colour enhancing effects. Of course we can't forget the fiji purple bulb. I'm personally not a fan of it but a lot of people do like the effect.

The bottom line is you have a lot of options in front of you that you can persue with your T5 fixture to help bring out your colours.

[ScubaSteve]

Ya, those little LED's would be easily drowned out by your main lights. If you want your colours to "pop" more they a higher colour temperature bulb (like 14,000K) or try some of the specialty bulbs like the Fiji Purples, etc. I'm not a T5 guy (Halides or Bust!) by I have been impressed by some of the tanks that have a nice mix of T5 bulbs. Poke around this site a bit to see what combos people are running. The Grizz has a pretty nice looking set-up; take a look at what he has (there is a T5 bulb thread that started recently and he's got some info there).

[spawn]

That's right I find the lights too bright as is, with a lack of color, or color that is washed out. So I'm thinkin keep the two Gsmn. actinic bulbs and add 2 @ 22k, and your suggesting 14k bulbs for the remaining 2 ? Most of my corals are sps, is that gonna be enough,to maintain good growth? I don't know much about the lighting yet. Here's the rest of the water par.
sal 1.026
ph 8.4
kh 9
ca 425
mg 1350
no3 0

[kien]

Originally Posted by spawn

That's right I find the lights too bright as is, with a lack of color, or color that is washed out. So I'm thinkin keep the two Gsmn. actinic bulbs and add 2 @ 22k, and your suggesting 14k bulbs for the remaining 2 ? Most of my corals are sps, is that gonna be enough,to maintain good growth? I don't know much about the lighting yet. Here's the rest of the water par.
sal 1.026
ph 8.4
kh 9
ca 425
mg 1350
no3 0

Those are great parameters!

A combination that I like and what I currently run on one of my tanks is..

14K
22K (dusk and dawn)
10K
14K
22K (dusk and dawn)
14K

I'm actually not a fan of actinic bulbs as I mentioned before, they have pretty low PAR value. You can achieve a similar effect with the 22Ks while gaining PAR. Bulb selection is such a personal choice though. What works for me might not work for you, and vice versa.