|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#11
02-05-2009, 05:36 AM
|
|||||
|
|||||
I intend to drill mine. I never did it before. Any tips would be appreciated.
|
|
#12
02-05-2009, 06:16 AM
|
|||||
|
|||||
|
I purchased the cheap diamond hole bits off ebay from the guy from hongkong. He's really popular with the RC site DIY fanboys. Anyways I just bought one of those 65 cent toilet wax rings to hold water like a dam while I drilled in order to cool the bit. Started the bit on like a 45 degree angle and slowly worked to a 90 degree. Then I just let the weight of the drill work its way through the glass. I did 3 holes and almost pooped my pants with each one but in the end it really wasn't that hard and i'll have no problem drilling my next tank.
Oh yeh, I actually have pictures somewhere that I could resize and post for you if you really need them. Will check this thread tomorrow, off to bed I go!
|
|
#13
02-05-2009, 06:44 AM
|
|||||
|
|||||
|
Did you use a template to start the bit ?
|
|
#15
02-05-2009, 04:53 PM
|
|||||
|
|||||
|
i have drilled a few myself. your number 1 reef keeping rue aplies here too.
PAITENCE........
__________________
72 Gallon Bowfront Reef.. Hardware:2x250w Luminex Elite HQI Reflectors (Phoenix Hexarc Bulbs), Galaxy 2x250w Electronic ballast, Euroreef 130 Skimmer, Sedra KSP 7000 Retern... Live Stock: Pair of Hawaiian Flame Wrasse, Leopard Wrasse, Pink Streaked Wrasse, Pair True Percula Clowns, Potters Angel, African Flameback Angel, Orange Fin Tomini Tang, Yellow Assessor, Tailspot Blenny, Purple Firefish.. 45 G FW Asain Barb Community tank.
|
|
#16
02-16-2009, 10:32 PM
|
||||
|
||||
|
call mitch at bow valley aquariums. I think he charges $25.00 per hole and it takes about 20 min to do. He does his with adrill press, really cool
Bow Valley Awuariums (403) 272-4960 tell him Rahim sent you.
|
|
#17
02-17-2009, 03:32 AM
|
|||||
|
|||||
|
Check this out
http://www.reefcentral.com/forums/sh...hreadid=603816 Not sure if I can post this or not. If not can someone remove it for me.
|
|
#18
02-18-2009, 05:15 AM
|
|||||
|
|||||
|
Lots of great info.
Thank you for this link.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
