Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > FOWLR

Reply
 
Thread Tools Display Modes
  #1  
Old 11-06-2008, 08:32 PM
trilinearmipmap trilinearmipmap is offline
Member
 
Join Date: Feb 2003
Location: Prince Rupert B.C.
Posts: 1,213
trilinearmipmap is on a distinguished road
Default Considering switching a 75 G FW to FO or FOWLR

I have a 75 gallon planted tank that has been more headache than it is worth the past 6 or 7 years.

I have considered switching it to a fish-only, or a FOWLR system. It is in my formal living room, I want something that will look good but not be much trouble and time to maintain.

Current tank specs are 48" long 75 gallon non-drilled tank, Eheim canister filtration, 4 x 55-watt CF lighting.

Most of the fish that appeal to me for FOWLR seem to need a larger tank than 75 gallons: Tangs, Angelfish, longhorned cowfish, triggers, etc.

I also don't want to spend too much, I've thought about getting a Lifereef overflow and putting a Bubble Magus in the sump, or else keeping the canister filter and adding a sulfur denitrator. Alternatively picking up a used Tunze in-tank skimmer or Deltec hang-on skimmer and going sumpless. Also considered getting some soft corals with the current lighting. Overall a budget of $1000.00 to change this tank to FO or FOWLR.

If anyone has any ideas or suggestions, including what fish would be appropriate for this tank, any experience with sulfur denitrators, etc. I have done reef for something like 5 years but never FOWLR or FO.
__________________
120 gallon sps/anemones/LPS reef since 2004
Apex controller
8 x 54 watt T5 PowerModule
Herbie's silent overflow system
Jebao DC 12000 return pump
Jecod CP-40 Cross-flow circulation device
Mini Bubble King 180
Barr Aquatics calcium reactor
Bucket fuge
Reply With Quote
  #2  
Old 11-06-2008, 08:52 PM
JDigital's Avatar
JDigital JDigital is offline
Member
 
Join Date: May 2008
Location: Airdrie
Posts: 2,795
JDigital is on a distinguished road
Send a message via MSN to JDigital
Default

I was under the impression that FW conversions needed some type of special "treatment" if they have been dosed with copper, before starting a SW tank... not sure if that's true or not... Someone confirm?

You could probably get away with a good HOB Deltec skimmer and skip the hassle (risk) of a HOB overflow.
__________________
180G Office Reef. Started Sept 2012 http://www.canreef.com/vbulletin/showthread.php?t=88894

62G Starfire Reef. Started Jan 2013 http://www.canreef.com/vbulletin/showthread.php?t=89988
Reply With Quote
  #3  
Old 11-06-2008, 08:54 PM
trilinearmipmap trilinearmipmap is offline
Member
 
Join Date: Feb 2003
Location: Prince Rupert B.C.
Posts: 1,213
trilinearmipmap is on a distinguished road
Default

Never dosed copper.

Anyway I think the copper issue is more if you are planning a reef tank, not a FOWLR.
__________________
120 gallon sps/anemones/LPS reef since 2004
Apex controller
8 x 54 watt T5 PowerModule
Herbie's silent overflow system
Jebao DC 12000 return pump
Jecod CP-40 Cross-flow circulation device
Mini Bubble King 180
Barr Aquatics calcium reactor
Bucket fuge
Reply With Quote
  #4  
Old 11-06-2008, 08:56 PM
Phanman's Avatar
Phanman Phanman is offline
Member
 
Join Date: Mar 2007
Location: Calgary
Posts: 422
Phanman is on a distinguished road
Default

From my understanding once copper has been used in the tank it pretty much cant be used for a salt water tank. You would need to remove all the silicone between all the panels and then reassemble with new silicone as the copper probably leeched into the silicone.
__________________
- John -

3x20g Display Established June 08|Koralia nano, 1, 4|Euroreef Skimmer|250W MH retro kit|Mag 18 return|RODI
120g Display Established Jan 1, 09|Vortech MP40|Koralia 4|I-Tech 100 w Tunze 9410.04A|Aquactinics Constellation 7x54W|Mag 18 return|RODI
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:48 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.