![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() Hi All,
The time has come that I'm ready to have my 280g hoisted onto my stand (and see if it fits, haha, measure once, cut about 12 times ![]() Anyhow, I think 4 guys will be needed to hoist it up, so I need help from maybe 3 guys. No corners or stairs or anything, that hard part was done long ago. The tank sits on the floor right behind the stand, so it should be a simple matter of grunting it up and over a couple feet. Nevertheless I think I am going to try to rent 4 appliance holder suction cup things because we won't be able to get our fingers under the tank. So what I'll probably do, is if we can line up some help, I'll try to have the holder things rented beforehand. I don't know if an evening during the week works better or a weekend. I don't have frags to pay for your help but I'll buy you beer maybe ![]() Anyone? PS. I live in Evergreen (SW).
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
![]() I, and Krazykuch will be down again next weekend. We can help.
|
#3
|
|||||
|
|||||
![]() I'm in....but generally speaking, Sunday and Thursday nights are bad for me. Let me know
![]() |
#4
|
|||||
|
|||||
![]() OMG its finally happening!! Someone take a camera to record this momentous occasion!!!
![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#5
|
|||||
|
|||||
![]() Holy Crap?! After how many years of sitting on the floor - it's gonna be installed?
![]() I can come help if needed, not so good for lifting, but I can be that extra set of hands that's usually required... (and run a camera)
__________________
By reading, replying to, commenting about, or in any way accessing the material in this post; including but not limited to storing in a database, retrieving from a database, viewing in a web browser, including it in or making a reference to it in a legal document, or accidentally glancing at it you agree to send me $100. |
#6
|
|||||
|
|||||
![]() I can lend a hand too Tony. Let me know? If nothing else I can lend moral support and stare at your ritteri tank while others fo the hard work.
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 |
#7
|
|||||
|
|||||
![]() I'll be there in spirit Tony!
__________________
Brad |
#8
|
|||||
|
|||||
![]() Let me know when.
![]() Maybe I'll bring my camera too. Just for Christy. ![]()
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#9
|
|||||
|
|||||
![]() I might be available to help Tony. PM me when you know what weekend and if we don't have any plans I'll come give a hand.
|
#10
|
|||||
|
|||||
![]() Tony,
I can help Monday - Wed evenings this week, or on the weekends but not this weekend. I am out of town for a week leaving Thursday. Just let me know if & when I can be of service.
__________________
![]() Greg Last edited by Snappy; 11-04-2007 at 07:08 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|