![]() |
|
#1
|
|||||
|
|||||
![]() I got a Fluval edge that I made some change to it to be able to do some salt water softies(maybe even LPS) I am asking for $80 (firm)
It is the regular Fluval Edge with original base,heater and the back where you can hide your power cords in. I removed the filter that comes with it and removed it's original lights. I added a Nano Koralia Power head. I have replaced the light with couple clip LED lights 4x1W Blue and 2x1W White that gives you a 14000K to 20000K look I have taken some PAR reading of the light with water in the tank just right now. The first picture is showing the PAR reading at the bottom of the tank ![]() The 2nd picture is the reading middle of the tank ![]() Here is the back of the tank where I removed its old light and clip both small LED on it. ![]() And I have tested 1 single clip light ( 1w white 2w blue) on my 24x24x24 tank (5" above water level) This is what my coral looks like at the bottom of the tank ![]()
__________________
~* <3 NEMO <3 *~ ![]() |
#2
|
||||
|
||||
![]() Can I buy just lights, heater and pump from you. are you willing to ship to Calgary?
|
#3
|
|||||
|
|||||
![]() The set up is Pending pic up.
__________________
~* <3 NEMO <3 *~ ![]() |