|
|
|
|
|
#1
08-31-2012, 12:32 AM
|
||||
|
||||
Mp 10 problem
I have a brand new mp 10 and in having issues with the pump staying put on glass, its not falling off but every couple days it starts spinning. The glass is. 3/8 thick, not sure what the deal is,
__________________
125 gal,40gal sump, 4 ai sol blue, 2 mp40es,swc 180 cone skimmer, kalk reactor, 2 tlf reactors(carbon& denitrate) uv light, refugium with mangroves 
|
|
#2
08-31-2012, 12:48 AM
|
||||
|
||||
|
Don't use the rubber coupler/pad that comes with it. If you aren't using it, then it sounds like vibration is turning it? Are you sure it is aligned properly?
|
|
#3
08-31-2012, 12:52 AM
|
||||
|
||||
|
Im not using pad, and im pretty sure its alligned properly, i have 2 mp 40 as well and had no problem, its weird i set it the a few days later its just spinning in place
__________________
125 gal,40gal sump, 4 ai sol blue, 2 mp40es,swc 180 cone skimmer, kalk reactor, 2 tlf reactors(carbon& denitrate) uv light, refugium with mangroves
|
|
#4
08-31-2012, 12:53 AM
|
||||
|
||||
|
Hit up Dave at Concept Aquatics. I'm sure it's a warranty issue.
|
|
#6
08-31-2012, 01:09 AM
|
||||
|
||||
|
I dont think the mp 10 has adjustable spacers on the, my mp 40 does
__________________
125 gal,40gal sump, 4 ai sol blue, 2 mp40es,swc 180 cone skimmer, kalk reactor, 2 tlf reactors(carbon& denitrate) uv light, refugium with mangroves
|
Hybrid Mode
