|
|
|
|
|
#1
04-07-2012, 08:19 AM
|
|||||
|
|||||
Suction cups for moving large tank?
I am going to be moving a large tank here in the next little bit into my house (265g) and am wondering about the suction cup handles that everyone uses to move glass/ large aquariums. Where do you get them? How much do they cost? Just want to be 100 percent I am using the right product as there is alot of time/money on the line when moving a tank and I would hate to **** it up!
|
|
#2
04-07-2012, 02:13 PM
|
|||||
|
|||||
|
http://www.princessauto.com/pal/prod...n.-Suction-Cup
I just bought a pair of these on sale for 5.99. They have 3 large suction cups per handle, so look to be pretty sturdy. I could have used them a couple months ago, when I moved a large tank. But at least I have them now for next time.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem.
|
|
#3
04-07-2012, 02:16 PM
|
|||||
|
|||||
|
Check with some of the tool rental places. They sometimes have some for rent.
I just moved a 225g into my basement and the cups are a life saver! (I was on my way to get the ones at princess auto and a friend told my they had one slip off while moving his 225g. Just a heads up)
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags  My other summer hobby: http://www.edkra.ca
|
|
#4
04-07-2012, 03:55 PM
|
|||||
|
|||||
|
Quote:
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694
|
|
#5
04-07-2012, 03:59 PM
|
||||
|
||||
|
Go to your local glass/window shop and offer one of the lakies a couple bucks to borrow some. I work for a window company and we have several and all good quality. Basically if the cups just have a flip lever to grab they are not very good quality. A good cup should have a pump shaft out the side and a separate release valve. That style can independently hold over 400 lbs per cup.
|
Hybrid Mode
